12.1KV 242 kVar High Voltage Three Phase Capacitor For AC Power System

12.1KV 242 kVar High Voltage Three Phase Shunt Power Capacitor

1. Overview of 12.1KV 242 kVar High Voltage Three Phase Shunt Power Capacitor

Medium voltage shunt capacitor/High voltage shunt capacitor is composed of a pack, a case, outlet porcelain busing, etc. The two sides of stainless steel case are welded with hanging brackets for installation, and one hanging bracket is equipped with a grounding bolt. In order to adapt to various voltages, the pack is composed of several small elements connected in parallel and series. The capacitor is equipped with a discharge resistor.

2. Purpose of 12.1KV 242 kVar Three Phase High Voltage Shunt Power Capacitor

Medium voltage shunt capacitor/High voltage shunt capacitor are suitable for 50Hz or 60Hz AC power systems to improve the power factor of the power system, reduce line losses, improve the quality of the power supply voltage, and increase the active output of the transformer.

3. Main features of 12.1KV 242 Kvar Three Phase High Voltage Shunt Power Capacitor

• 3.1 Casing: Cold-pressed, anti-fouling type casing is adopted, and the creepage distance is not less than 31mm/kV.
• 3.2 Mature internal fuse technology.
• 3.2.1 After testing, the internal fuse can isolate the faulty component within 0.2ms, the release energy of the fault point is not more than 0.3kJ, and the remaining intact components are not affected.
• 3.2.2 Advanced concealed internal fuse structure, using oil gap arc extinguishing, reducing the possibility of blasting the capacitor case.
• 3.2.3 The internal fuse protection and relay protection have perfect coordination standards to ensure the safe and reliable operation of the entire device.
• 3.3 Liquid medium: 100% insulation oil (NO PCB) is used. This liquid has excellent low temperature performance and partial discharge performance.

4. Installation of 12.1KV 242 Kvar Three Phase High Voltage Shunt Power Capacitor

• All these series capacitors serve for common ambient conditions, standard category for capacitor covers -40/A,-25/A,-5/A,-5/C, working altitude not more than 2000m
• The capacitors shall be mounted in the place where has no corrosive steam and gas, and snow, rain, dust can't be accessible, and well ventilated.
• The capacitor can be mounted on steel support, layout not more than 3 layers, each layer not more than two rows. In order to get good ventilating, the clearance between capacitors in each layer shall not less than 200mm, outdoor capacitor shall have 300mm at least, and the top of the capacitor shall have 1000mm away from house roof at least.

242 Kvar Three Phase Capacitor Bank

12.1KV Three Phase Capacitor Bank

60Hz Capacitor Bank High Voltage

12.1KV 242 kVar High Voltage Three Phase Capacitor For AC Power System Images