300 kVar Power Factor Capacitor 3-phase Capacitor Bank

300 kVar Power Factor Capacitor 3-phase PFC Capacitor Bank

1.Overview of 10kv 3 Phase 300 kvar High Voltage Shunt Capacitor

Medium voltage shunt capacitor/High voltage shunt capacitor is composed of a pack, a case, outlet porcelain busing, etc. The two sides of stainless steel case are welded with hanging brackets for installation, and one hanging bracket is equipped with a grounding bolt. In order to adapt to various voltages, the pack is composed of several small elements connected in parallel and series. The capacitor is equipped with a discharge resistor

2. Function of 10kv 3 Phase 300 kvar High Voltage Shunt Capacitor

Medium voltage shunt capacitor/High voltage shunt capacitor are suitable for 50Hz or 60Hz AC power systems to improve the power factor of the power system, reduce line losses, improve the quality of the power supply voltage, and increase the active output of the transformer.

3. Main features of 10kv 3 Phase 300 kvar High Voltage Shunt Capacitor

• 3.1 Casing: Cold-pressed, anti-fouling type casing is adopted, and the creepage distance is not less than 31mm/kV.
• 3.2 Mature internal fuse technology.
• 3.2.1 After testing, the internal fuse can isolate the faulty component within 0.2ms, the release energy of the fault point is not more than 0.3kJ, and the remaining intact components are not affected.
• 3.2.2 Advanced concealed internal fuse structure, using oil gap arc extinguishing, reducing the possibility of blasting the capacitor case.
• 3.2.3 The internal fuse protection and relay protection have perfect coordination standards to ensure the safe and reliable operation of the entire device.
• 3.3 Liquid medium: 100% insulation oil (NO PCB) is used. This liquid has excellent low temperature performance and partial discharge performance.
• 3.4 The main insulation adopts a composite insulation structure, which not only guarantees excellent electrical performance, but also has a certain degree of mechanical strength, which ensures that the insulation of the capacitor complete set of devices is 100% reliable without protection.
• 3.5 Good sealing performance: The annual leakage rate is less than 0.1%, and the sealing performance of the capacitor is guaranteed through measures such as automatic argon arc welding, vacuum leak testing, and thermal aging.
• 3.6 Partial discharge level: the extinguishing voltage is not less than 1.5Un, and each capacitor is tested for partial discharge during production.

4. Applicable standard of 10kv 3 Phase 300 kvar High Voltage Shunt Capacitor

IEC60871 or equivalent

5. Working Conditions

• 5.1Can be installed indoors and outdoors
• 5.2The altitude of the installation site generally does not exceed 2000 meters
• 5.3Temperature category: -40/D
• 5.4There is no gas or steam that is severely corrosive to metals.
• 5.5No strong mechanical vibration

6. Customized service is provided for each specific evironment and power system

300 kVar Power Factor Capacitor 3-phase Capacitor Bank Images