Brand new high voltage PP film capacitor bank, Filter capacitor
1. Overview
The filter capacitor is composed of a pack, a case, outlet porcelain busing, etc. The two sides of stainless steel case are welded with hanging brackets for installation, and one hanging bracket is equipped with a grounding bolt. In order to adapt to various voltages, the pack is composed of several small elements connected in parallel and series. The capacitor is equipped with a discharge resistor.
2. Function
The high-voltage filter capacitor is connected with other components to form an AC filter, which is connected in parallel in a 50Hz or 60Hz high-voltage AC power system to provide a low-impedance channel for one or more harmonic currents and reduce the harmonic level of the network , Improve the power factor of the system.
| Rated voltage | 6.6/√3, 6.9/√3, 7.2/√3, 10.5/√3, 10.5/2√3,11/√3, 11.5/√3, 11/2√3, 12/√3, 12/2√3, 11/2, 12/2,12.5/2,11,12,19,21,21/2, 22/2,23/2,24/2, 22/√3, 22/2√3, 24/√3, 24/2√3,Special specification voltage can be negotiated |
| Rated frequency | 50Hz；60Hz |
| Rated Capacity | 100,200,250,300,334,400,417,500,535,550,570,600,625,667,833kvar,Special specifications can be negotiated |
| Insulation level | 42/75kV,50/125kV |
| Protection method | Internal fuse or no fuse |
| Number of phases | Single-phase |
| Capacitance deviation | -3%～+5% |
| Package | Export wooden packing |
| Loss tangent value (tanδ) | ≤0.0003 |
| Altitude | ≤2000 |
| Environmental temperature category | -40/B |
| Contamination level of casing | D |
| Discharge resistance | The capacitor is equipped with a discharging resistor. After being disconnected from the grid, the voltage on the terminal can drop below 75V within 10 minutes |
| Surrounding environment | No severely corrosive gas and steam to metal, no conductive or explosive dust, no severe mechanical vibration. |
3. Main features
3.1 Casing: Cold-pressed, anti-fouling type casing is adopted, and the creepage distance is not less than 31mm/kV.
3.2 Mature internal fuse technology.
- After testing, the internal fuse can isolate the faulty component within 0.2ms, the release energy of the fault point is not more than 0.3kJ, and the remaining intact components are not affected.
- Advanced concealed internal fuse structure, using oil gap arc extinguishing, reducing the possibility of blasting the capacitor case.
- The internal fuse protection and relay protection have perfect coordination standards to ensure the safe and reliable operation of the entire device.
3.3 Liquid medium: 100% benzyltoluene (M/DBT) is used. This liquid has excellent low temperature performance and partial discharge performance.
3.4 The main insulation adopts a composite insulation structure, which not only guarantees excellent electrical performance, but also has a certain degree of mechanical strength, which ensures that the insulation of the capacitor complete set of devices is 100% reliable without protection.
3.5 Good sealing performance: The annual leakage rate is less than 0.1%, and the sealing performance of the capacitor is guaranteed through measures such as automatic argon arc welding, vacuum leak testing, and thermal aging.
3.6 Partial discharge level: the extinguishing voltage is not less than 1.5Un, and each capacitor is tested for partial discharge during the factory test.
4. Applicable standard
IEC60871 or equivalent
5. Working conditions
- Applicable for indoor or outdoor
- The altitude of the installation site generally does not exceed 2000 meters
- Temperature category: -40/B, pollution level: 1V level
- There is no gas or steam that is severely corrosive to metals.
- No strong mechanical vibration
- No explosive, flammable and dangerous goods
Product Tags:
|
|
PP Film High Voltage Capacitor Bank 50Hz 60Hz IEC Standard Standard Images
|
